Solimar Solution Requirements

  • OS: Windows® Server 2008, Windows® 7 Professional or Ultimate, Windows® 8, Windows® 10, Windows® Server 2012, Server 2012 R2
  • CPU: 2.4 GHz, Quad Core
  • RAM: Minimum: 2 GB, Recommended: 4-6 GB as supported by hardware & OS
  • HDD: 2 GB free disk space for software installation, formatted with Windows® NT File System (NTFS). Disk space requirements for processing data vary based on job size, volume, and application
  • NIC: Ethernet network interface supporting the maximum speed of the network, preferably 1 Gb/s or greater
  • USB Ports: 1 available port required if using physical license keys*
  • Additional Software: Microsoft® .NET Framework 3.5
  • OS: Windows® Server 2008, Windows® 7 Professional or Ultimate (64-bit), Windows® 8, Windows® 10, Windows® Server 2012, Server 2012 R2
  • CPU: x64 2.4 GHz, Quad Core
  • RAM: Minimum: 8 GB, Recommended: 24 GB or more
  • HDD: 6GB free disk space for software installation, formatted with Windows® NT File System (NTFS). Disk space requirements for processing data vary based on job size, volume, and application
  • NIC: Ethernet network interface supporting the maximum speed of the network, preferably 1 Gb/s or greater
  • USB Ports: 3 available ports required if using physical license keys*
  • Additional Software: Microsoft® .NET Framework 4.5; will be installed by Rubika® installer if not found
  • Please consult the requirements for your edition of Adobe® Acrobat® in addition to those listed below. In case of overlapping requirements, the higher value should be used. Adobe® Acrobat® is not included with SDX Designer. For licensing information, see Adobe Systems at http://www.adobe.com.
  • OS: Server 2008 & Server 2008 R2 (all editions except Web & HPC), Windows 7 (Professional & Ultimate), Windows® 8, Windows® 10
  • CPU: 2.4 GHz
  • RAM: Minimum: 2 GB
  • HDD: 1GB free disk space for software installation, formatted with Windows® NT File System (NTFS)
  • NIC: Ethernet network interface supporting the maximum speed of the network, preferably 1 Gb/s or greater
  • USB Ports: 1 available port required if using physical license keys*
  • Additional Software: Adobe® Acrobat® 8 or higher, Standard or Professional edition; Microsoft® .NET Framework 3.5 SP1
  • Note: SDX Designer will not work with Adobe® Reader
  • OS: Windows® Server 2008 SP1, Server 2008 R2, Windows® 7 Professional or Ultimate SP1 (64-bit), Windows® 8, Windows® 8.1, Windows® 10, Windows® Server 2012, Server 2012 R2
  • CPU: x64 2.4 GHz, Quad Core
  • RAM: Minimum: 8 GB, Recommended: 24 GB or more
  • HDD: 6GB free disk space for software installation, formatted with Windows® NT File System (NTFS). Disk space requirements for processing data vary based on job size, volume, and application
  • NIC: Ethernet network interface supporting the maximum speed of the network, preferably 1 Gb/s or greater
  • USB Ports: 1 available port required if using physical license keys
  • Additional Software: Microsoft® .NET Framework 4.5 will be installed by the installation program if not found

SPDE (64-bit)

  • OS: Server 2008 R2, Server 2012, Server 2012 R2, Server 2016, Windows® 7 Professional, Windows® 8 professional, Windows® 10. NOTE: 64 bit only.
  • CPU: x64 2.4 GHz, Quad Core
  • RAM: Minimum: 8 GB, Recommended: 24 GB or more
  • HDD: 6GB free disk space for software installation, formatted with Windows NT File System (NTFS). Disk space requirements for processing data vary based on job size, volume, and application
  • NIC: Ethernet network interface supporting the maximum speed of the network, preferably 1 Gb/s or greater
  • USB Ports: 1 available port required if using physical license keys*
  • Additional Software: Microsoft .NET Framework 4.5, Microsoft Message Queuing; these will be installed by SPDE installer if not found

SPDE (32-bit)

  • OS: Microsoft® Windows® Windows 7 Professional or Ultimate
  • CPU: 2.4 GHz, Quad Core
  • RAM: 4 GB
  • HDD: 6GB free disk space for software installation, formatted with Windows NT File System (NTFS). Disk space requirements for processing data vary based on job size, volume, and application
  • NIC: Ethernet network interface supporting the maximum speed of the network, preferably 1 Gb/s or greater
  • USB Ports: 1 available port required if using physical license keys*
  • Additional Software: Microsoft .NET Framework 4.5, Microsoft Message Queuing; these will be installed by SPDE installer if not found

PDF & PostScript Workflows

For optimal performance, we suggest:
  • Note: Systems that process PostScript, PDF, very large files, or many workflows may require additional memory that can only be supported on a 64-bit operating system.
  • One 2.0+ GHz CPU core per printer
  • 64-bit OS with 4 GB or more RAM per interpreter instance
  • 100+ GB HDD, 15K RPM
  • Note: Some workflows may require additional hard drives. Please contact Solimar Systems for recommended specifications.

SPDE System Manager

  • OS: Microsoft Windows® Server 2003 SP1 & SP2, Server 2003 R2, Server 2008, Windows® 7 Professional or Ultimate, Windows® 8, Windows® 10, Windows® Server 2012, Server 2012 R2
  • CPU: 2.4 GHz
  • RAM: 2 GB minimum
  • HDD: 500MB free disk space for software installation
  • NIC: Ethernet network interface supporting the maximum speed of the network, preferably 1 Gb/s or greater
  • Additional Software: Microsoft .NET Framework 3.5; will be installed by SPDE installer if not found

SPDE Queue Manager

  • OS: Microsoft Windows® Server 2003 SP1 & SP2, Server 2003 R2, Server 2008, Windows® 7 Professional or Ultimate, Windows® 8, Windows® 10, Windows® Server 2012
  • CPU: 2.4 GHz
  • RAM: 2 GB minimum
  • HDD: 350MB free disk space for software installation
  • NIC: Ethernet network interface supporting the maximum speed of the network, preferably 1 Gb/s or greater
  • Additional Software: Microsoft .NET Framework 3.5; will be installed by SPDE installer if not found

SPDE Adapters

Legacy Adapters (32-bit operating systems – ONLY!)
  • SPDE host computers that will connect to legacy systems and devices must provide suitable slots for the adapter cards. The following legacy adapter cards require a 5-V PCI slot:
    • Parallel Input adapter
    • Tiger II and Tiger III BUS/TAG adapter
    • P6100 and P6101 BUS/TAG adapter
    • SCSI adapter (SCSI SDI Output module and Tape Input module)
  • The P6200 BUS/TAG input card is compatible with the following slots:
    • 3.3-V PCI slot
    • 5-V PCI slot
    • 3.3-V 100-MHz PCI-X slot
  • All legacy adapters are full-height PCI cards. The P6100, P6101, and P6200 BUS/TAG input legacy adapters are full-length cards (13.5″ long) and require sufficient unobstructed space inside the PC chassis. All other legacy adapters are half-length cards.
  • Each SCSI hard drive used by the SCSI SDI Output module requires one 3.5″ bay and power supply connection.
  • Some legacy Xerox workflows may require a 3.5″ or 5.25″ diskette drive for the transfer of resources.
Channel Adapters (32-bit operating systems – ONLY!)
  • The channel adapters currently shipping (ESCON, Channel In, Channel Out) are compatible with the following slots:
    • 5-V slots
    • 3.3-V slots
    • PCI slots
    • PCI-X slots
  • The Channel In and Channel Out adapters are full-height, half-length cards.
  • The ESCON adapter is a full-height and full-length card and requires sufficient unobstructed space inside the PC chassis.
  • OS: Windows® 8, Windows® 10, Windows® Server 2012, Server 2012 R2
  • CPU: 2.4 GHz
  • RAM: Minimum: 2 GB
  • HDD: 1GB free disk space for software installation, formatted with Windows® NT File System (NTFS)
  • NIC: Ethernet network interface supporting the maximum speed of the network, preferably 1 Gb/s or greater
  • USB Ports: 1 available port required if using physical license keys*
  • Additional Software: Microsoft® .NET Framework 2.0
  • Note: Systems that execute indexing and Rubika® processes in SOLfusion™ do not require Adobe® Acrobat®.
  • Note: SOLfinder requires Adobe® Acrobat® or Adobe® Reader
  • OS: Windows® Server 2008, Windows® 7 Professional or Ultimate, Windows® 8, Windows® 10, Windows® Server 2012, Server 2012 R2
  • CPU: 2.4 GHz
  • RAM: Minimum: 2 GB
  • HDD: 350MB free disk space for software installation
  • NIC: Ethernet network interface supporting the maximum speed of the network, preferably 1 Gb/s or greater
  • Additional Software: Microsoft® .NET Framework 3.5, Microsoft SQL Server 2005, 2008, 2012, 2014 (remote or local instance), IIS Web Server if using SQL Reporting Services or SOLitrack web client (optional). SOLitrack Client: MSIE 8.+
  • Intel-based Pentium or Xeon PC
  • Windows® Server 2008, Windows® 7 Professional or Ultimate, Windows® 8, Windows® 10, Windows® Server 2012, Server 2012 R2

SSE Application Server

  • Please refer to the hardware requirements for your version of Windows® & SQL for optimal hardware specifications and performance
  • OS: Microsoft® Windows® Server 2008 (32-bit and 64-bit editions), Windows® Server 2008 R2, and Windows® Server 2012
  • CPU: 2.4 GHz, Dual Core
  • RAM: 4 GB
  • HDD: 2GB free disk space for software installation, formatted with Windows NT File System (NTFS)
  • NIC: Ethernet network interface supporting the maximum speed of the network, preferably 1 Gb/s or greater
  • USB Ports: 1 available port required if using physical license keys*
  • Additional Software: Microsoft .NET Framework 3.5 SP1

SSE Database Server

  • Microsoft® SQL Server 2005 (Service Pack 2), 2008, 2012, 2014: 1 CPU license; SQL Agent must be set to automatically start
  • Unicode plane 0 (the default plane) is supported by SQL Server 2005 and later. If you will index data that uses Unicode plane 1 and above, SQL Server 2012 is required.
  • OS: Any newer version of Windows® supported by the version of SQL Server
  • NIC: Ethernet network interface supporting the maximum speed of the network, preferably 1 Gb/s or greater
  • USB Ports: 1 available port required if using a USB license key
  • Additional Software: Microsoft .NET Framework 3.5 SP1 or later, MS Internet Explorer 6.0 Service Pack 1 or later

SSE Web Server

  • Internet Information Services (IIS)
  • OS: Microsoft® Windows® Server 2008, Server 2008 R2, Windows® Server 2012
  • CPU: 2.0 GHz+
  • NIC: Ethernet network interface supporting the maximum speed of the network, preferably 1 Gb/s or greater
  • Additional Software: Microsoft® Internet Information Services (IIS), Microsoft® .NET Framework 3.5 SP1 or later

SSE System Manager

  • OS: Microsoft® Windows® Server 2008, Windows® Server 2008 R2, Windows® 7 Professional or Ultimate, Windows® 8 Pro or Enterprise, Windows® 10
  • Additional Software: Microsoft® .NET Framework 3.5 SP1 or later, Adobe® Acrobat® 8 or higher (for SDX Designer)

SSE End User

  • Adobe® Reader® 8.x+
  • MSIE 7.x+ or Firefox 3.x+ web browser
  • Microsoft .NET Framework 3.5, Service Pack 1 or later
  • OS: Microsoft® Windows® 7 Professional or Ultimate, Windows 8 Pro or Enterprise, Windows Server 2008 R2, Server 2012, Server 2012 R2
  • NIC: Ethernet network interface supporting the maximum speed of the network, preferably 1 Gb/s or greater
  • USB Ports: 1 available port required if using physical license keys
  • Additional Software: Microsoft® .NET Framework 4.5 will be installed by the installation program if not found
  • Notes: There are separate installers for the 32-bit and 64-bit versions of XIMAGEpdf. The 32-bit version is supported on Windows 7 only

* A USB hub device can be used to increase the number of USB ports. USB ports are not required for any products using machine validation licensing.</span>